Aperture is biology: the pest-by-pest ladder, the honest boundary of the 2–7mm range (aphids, whiteflies, thrips pass), the airflow trade-off, and the sealing details that decide whether a correct mesh performs.
Mesh size is the one specification that decides whether an insect net works at all. Weight, color and width are logistics; aperture is biology. And this is where honesty pays better than salesmanship: a 2–7mm insect net — the range we knit — stops butterflies, moths and the larger chewing insects reliably, and it does not stop aphids, whiteflies or thrips. Saying that plainly saves the grower who is about to buy the wrong net for the pest that is actually eating the crop. This guide is the aperture ladder: which pests sit at which size, what our range covers, what it does not, and the sealing details that decide whether a correct mesh performs.
Insects do not negotiate with netting — they either fit through the hole or they do not. The working picture, pest by pest:
| Pest | Adult size | Mesh needed | Stopped by 2–7mm? |
|---|---|---|---|
| Cabbage white butterfly | 30–50mm wingspan | Anything under ~7mm | Yes — the classic case |
| Diamondback moth & other moths | 8–12mm body, larger wingspan | 2–3mm secure | Yes |
| Leafminers (adult flies) | 2–3mm body | 2mm secure | Mostly — at the fine end |
| Large beetles, weevils | 3–15mm body | 2–3mm secure | Yes |
| Flea beetles | 1.5–2.5mm body | 1–1.5mm ideal | Borderline — 2mm helps, not guaranteed |
| Carrot & onion flies | 4–6mm body | 1.3–2mm | Partially — finest end only |
| Aphids | 1–3mm, soft-bodied, squeeze | ~0.3–0.6mm class | No |
| Whiteflies | ~1mm | ~0.2–0.5mm class | No |
| Thrips | 0.8–1.5mm, slender | Finest class | No |
Read the table from your pest backwards, not from a catalog forwards. Identify what is actually damaging the crop first — then check whether mesh is even the right tool. For the pests in the top half of the table, physical exclusion is the cheapest plant protection on the farm. For the bottom half, a 2–7mm net is the wrong purchase no matter how well it is made.
Our production range runs 2–7mm aperture, 30–110 gsm, and the honest coverage list is still long: the whole lepidoptera group (cabbage whites, diamondback moths, armyworm moths, codling moths), the larger beetles and weevils, leafhoppers, wasps, and the larger flies. That is not a niche — it is most of the pressure on brassicas, fruit trees, and open-field vegetables in temperate climates. A brassica grower’s season is usually decided by the cabbage white, not the aphid. The crop-specific setup is in the brassica netting guide, and the protected-crop version is in the greenhouse insect net guide.
The pests it does not cover deserve the same clarity. Aphids, whiteflies and thrips pass 2mm apertures without noticing them. The industry answer for those is a different product class — the 40–50 mesh anti-aphid and anti-whitefly screens, roughly 0.3–0.6mm apertures, which are woven to a different construction than our knitted range. We do not make that class, and we would rather say so than ship a container that fails at the farm gate. If whitefly is your primary enemy, buy the fine screen class from a supplier who makes it — and if butterflies and beetles are the enemy, our range is exactly the tool.
There is a physical price for every step finer, and it explains why “just buy the finest” is bad advice. Airflow drops as aperture closes. A 2mm net passes enough air to ventilate a hoop house on a warm afternoon; a 0.3mm anti-aphid screen behaves almost like a film — humidity builds, fungal pressure rises, and temperature climbs on still days. Light drops too. Every net shades a little; fine screens shade meaningfully, which is why greenhouse anti-insect screens are specified by light transmission, not just pest exclusion. And cost follows density — finer mesh means more yarn per square meter, so the honest question is never “what is the finest net” but “what is the coarsest net that stops my pest.” Coarsest-that-works is the spec: maximum airflow, maximum light, minimum fabric, and the pest still locked out.
From the factory side, the complaint pattern is consistent: the mesh was right and the enclosure leaked. A 2mm net with a 20mm gap at the soil line stops nothing. The sealing checklist that decides real-world performance:
The pollination question rides alongside: a sealed enclosure excludes bees as reliably as pests, so fruiting crops need either a bumblebee box inside or timed opening during bloom. The full logic is in the pollination guide.
OMB Textiles knits 100% virgin HDPE insect netting in Changzhou, China — founded in 2003, supplying growers and distributors across the Americas, Europe, the Middle East, Africa and Oceania. The working specification: apertures 2–7mm, 30–110 gsm (butterfly grades 30–50), widths 1–12m, roll lengths 5–200m, UV-stabilized for a 3–10 year service life depending on grade and site exposure. Widths to 12m exist so tunnels and orchard bays cover in a single sheet — no seams over the crop, no drip lines, no weak points. MOQ is 2 tons with mesh sizes, weights and widths mixed in one container; a 40’HQ carries 14–15 tons. Production runs 25–35 days after deposit; T/T 30/70 or L/C at sight; samples of the aperture range are free, courier on the buyer — hold them against your pest list before you commit to a container. Send your crop, your pest, your structure and your destination port via the contact page or WhatsApp — we reply within 24 hours with a mesh and weight recommendation, including the honest answer when mesh is the wrong tool. The full range is on the insect net product page, and farm-scale layout is covered in the farm-scale guide.
No — and any supplier who says otherwise is selling you a failed season. Aphids are soft-bodied, 1–3mm, and squeeze through apertures near their own body width. Reliable aphid exclusion needs the 0.3–0.6mm screen class, a different construction from standard knitted netting.
Whiteflies run about 1mm and need the fine screen class — roughly 0.2–0.5mm apertures, what the industry calls 50-mesh anti-whitefly screen. A 2–7mm net does not stop them. If whitefly is your primary pest, that fine class is the purchase; if your pressure is butterflies, moths and beetles, 2–7mm is the right tool.
The whole lepidoptera group — cabbage white butterflies, diamondback moths, armyworm and codling moths — plus larger beetles, weevils, leafhoppers, wasps and the larger flies. That covers most of the chewing-pest pressure on brassicas, fruit trees and open-field vegetables in temperate climates.
No. Every step finer costs airflow, light and fabric density — humidity and fungal pressure climb under fine screens, and cost follows yarn per square meter. The right spec is the coarsest mesh that stops your pest: maximum ventilation and light, minimum fabric, pest still excluded.
3–10 years depending on grade, site UV and handling — the UV-stabilizer package in the yarn decides it. All our netting is 100% virgin HDPE with UV stabilization dosed by batch; permanent structures in high-UV regions should spec the package explicitly when ordering.
This guide in other languages: Español · Русский · Português · العربية
Quick Inquiry
Tell us the product and requirement — we reply within 24 hours.
Bulk buyer (2 t+)? Send your spec — GSM, mesh, dimensions, quantity, destination port — and get a container-level quote, not a retail answer.
Prefer WhatsApp? +86 152 6119 9768